Mitsubishi Electric L02SCPU User's Manual And Reference page 214

(6) Causes of a batch load error
When the batch load processing has failed, the error cause is stored in SD636 (Project data batch load error
cause).
When the batch load function is executed using a display unit, an error message is displayed on the display unit.
SD636 value
800
H
801
H
802
H
803
H
804
H
805
H
810
H
820
H
821
H
900
H
901
H
A00
H
B00
H
C00
H
C01
H
C02
H
C04
H
C07
H
C08
H
C10
H
*1 If the function is executed again and the same error occurs, the possible cause is a hardware failure of the CPU module
or SD memory card. Please consult your local Mitsubishi representative.
212
The model of the load-destination CPU module is different from that of the load-source CPU module.
Reading data from the SD memory card has failed.
The SD memory card was removed during batch load processing.
A data folder without a system file (SVLDINF.QSL) was loaded.
• The file password 32 of the load-destination file is different from that of the load-source file.
• A file password 32 is not set to the load-source file while the load-destination file has a password.
• When the folder number (1 to 99) is set in SD909 (Auto loading target folder number) for auto loading, the folder with
the corresponding number does not exist in the SD memory card.
• The folder number out of the setting range (other than 0 to 99) is set in SD909 (Auto loading target folder number).
Loading data to the load-destination drive has failed.
Loading of the folder that includes a file that may be used in another application has failed.
Format was executed while any file that may be used in another application existed.
• When the batch load function is executed, the SD memory card is not inserted.
• When the batch load function is executed, the SD memory card lock switch of the CPU module is not slid down.
• When the folder number (1 to 99) is set in SD909 (Auto loading target folder number) for auto loading, the SD
memory card is not inserted.
• When the folder number (1 to 99) is set in SD909 (Auto loading target folder number) for auto loading, the SD
memory card lock switch of the CPU module is not slid down.
Use of an SD memory card is disabled by SM606 (SD memory card forced disable instruction).
• The size of load-target data is larger than the free space of each drive in the CPU module or SD memory card.
• The number of files to be loaded exceeds the number of files can be stored in each drive in the CPU module or SD
memory card.
The SD memory card is write-protected.
The batch load function was executed using a display unit during the latch data backup to the standard ROM.
The batch load function was executed using a display unit during online change.
The batch load function was executed using a display unit with an FTP client connected to and communicated with the
CPU module.
The batch load function was executed using a display unit while the CPU module change function with SD memory
card was being executed.
The batch load function was executed while the iQ Sensor Solution function (data backup/restoration) was being
executed.
The batch load function was executed while the file transfer function (FTP client) was being executed.
The batch load function was executed using a display unit when the CPU module was in RUN or PAUSE status.
Description
*1
*1