Mitsubishi Electric L02SCPU User's Manual And Reference page 357

Parameter
Item
*2
Built-in CC-Link Setting
Common Pointer No.
System Interrupt Setting
(Fixed Scan Interval)
Interrupt Program/Fixed Scan
Program Setting
Service Processing Setting
CPU Module Change Setting
*1 Setting of only a PAUSE contact is not allowed.
*2 This item is not available for the L02SCPU, L02SCPU-P, L02CPU, L02CPU-P, L06CPU, L06CPU-P, L26CPU, and
L26CPU-P because these modules do not support the built-in CC-Link function.
Description
No.
Select whether to use the built-in
1018
H
CC-Link
Set the start number of common
1005
H
pointers.
Set each execution interval for
1008
H
the interrupt pointers (I28 to I31).
Select whether to enable or
disable high speed execution of
1008
H
interrupt programs or fixed scan
execution type programs.
Select any of the following.
• Execute the process as the
scan time proceeds.
• Specify service process time.
1013
H
• Specify service process
execution counts.
• Execute it while waiting for
constant scan setting.
Set items required when
performing the CPU module
1017
H
change with SD memory card
function.
Setting range
Selected/deselected
P0 to P4095
0.5ms to 1000ms (In increments of
0.5ms)
Selected/deselected
• 1 to 99% (in increments of 1%)
• 1 to 10 (in increments of 1 time)
• 0.2 to 1000ms (in increments of
0.1ms)
• Blank
• Backup Start Setup Contact
• Backup Start Contact
• Backup Target Data
• Title Setting
APPX
Default Reference
MELSEC-L
CC-Link
System
Selected Master/Local
Module
User's
Manual
Page 338,

Section
5.10.2
• I28: 100.0ms
• I29: 40.0ms Page 339,
• I30: 20.0ms Section 5.11
• I31: 10.0ms
Page 324,
Deselected
Section 5.6.3
Execute the
process as the Page 94,
scan time Section 3.6
proceeds: 10%
Page 182,

Section 3.31
355
A