3.31.1
Backup to SD memory card
This function can save data in the CPU module to an SD memory card. If an SD memory card is used in a running
system, data can be backed up by replacing the SD memory card with the one for storing a backup data.
(1) Procedure
Backup start setup request
from a programming tool
Backup start request
from a programming tool
*1
After preparation for backup is completed, the following functions are disabled. (They are not resumed after backup.)
Refresh of a network module
Refresh of CC-Link IE Field Network Basic
Auto refresh of intelligent function module
Simple PLC communication function
*2
Do not perform the following during backup.
Insertion and removal of an SD memory card
Power-off
Reset
184
Start
Before backup start
The backup start setup
contact is turned on.
Backup start prepared
Backup is ready to start.*
Backup start preparation completed
The backup start contact
is turned on.
Backup in execution*
Backup to the SD memory card is completed.
Backup completed
End
1
2
Backup failed.
Backup error
Back up data again.