Mitsubishi Electric L02SCPU User's Manual And Reference page 115

(a) Using a RUN contact
Set a RUN contact.
Project window  [Parameter]  [PLC Parameter]  [PLC System]
Set a device used as a contact.
The remote RUN/STOP operation can be performed by turning on/off the set RUN contact.
• When the RUN contact is turned off, the CPU module status changes to RUN.
• When the RUN contact is turned on, the CPU module status changes to STOP.
(b) Using a programming tool
Open the "Remote Operation" dialog box.
[Online]  [Remote Operation]
Select "RUN" or "STOP"
for execution.
A remote RUN operation executed only from the programming tool that has executed a remote STOP operation to the CPU
module.
(c) By an external device using the MC protocol
Use MC protocol commands.
MELSEC Communication Protocol Reference Manual
(d) Using the link dedicated instruction of the CC-Link IE Field Network master/local
module
Use the link dedicated instruction of the CC-Link IE Field Network master/local module.
MELSEC-L CC-Link IE Field Network Master/Local Module User's Manual
CHAPTER 3 CPU MODULE FUNCTIONS
3
113