3.26
LED Control Function
Whether to turn off the LED after an error and whether to indicate an error or not (on/off) can be set.
3.26.1
Methods for turning off the LEDs
The LEDs can be turned off by the following operations.
After resolving the error cause, execute the LEDR instruction.
After resolving the error cause, clear the error using
(Continuation error only)
Use SM202 and SD202
For operation of SM and SD, refer to Page 166, Section 3.25. For the I/O ERR. LED, use SM1850, SM1870,
*1
SM1899, or SM1919. For details on SM and SD, refer to the following.
MELSEC-L CPU Module User's Manual (Hardware Design, Maintenance and Inspection)
For LED of the built-in CC-Link function, refer to the following.
MELSEC-L CC-Link System Master/Local Module User's Manual
How to turn off
*1
SM and SD.
CHAPTER 3 CPU MODULE FUNCTIONS
: Applicable, : Not applicable
Relevant LED
BAT.
ERR.
I/O ERR.
3
USER
169