Mitsubishi Electric L02SCPU User's Manual And Reference page 373

Parameter No.
Item
Transmission Sum Check
Setting Code
Communication Speed
Setting
Transmission Wait Time
• For serial
communication
: 100E
Online Change
• For predefined
protocol:
101B
Device to Store Predefined
Protocol Operation Status
To communicate data using the predefined protocol function, set protocols for communicating with external devices using the
predefined protocol support function of GX Works2.
Description
Set whether to add sumcheck
codes according to the
specifications of the protocol to
be executed.
Set a communication speed.
Set a transmission wait time
when the serial communication
function is selected.
Set whether to enable online
H
change when the serial
communication function is
selected.
H
Set the start device for storing
the predefined protocol
operating status when the
predefined protocol function is
selected.
The operating status of the
predefined protocol is stored in
the area of three points starting
from the set device.
Setting range
• Include
• Not include
9600bps, 19200bps, 38400bps,
57600bps, 115200bps
• No wait time
• 10 to 150ms (in increments of
10ms)
• Disable
• Enable
• D (including the extended data
register)
• W (including the extended link
register)
• R, ZR
APPX
Default Reference
Include
19200bps
No wait time
Page 215,
Section 3.37
Disable
Page 227,
Section 3.38
Blank
371
A