Mitsubishi Electric L02SCPU User's Manual And Reference page 86

Item

Socket communication
*2
function
File transfer function
(FTP server)
File transfer function
*1
(FTP client)
Simple PLC
communication
Built-in
*1*2
function
Ethernet
*2
function
IP address change
function
IP packet transfer
*1*2
function
E-mail send/receive
*1
function
SLMP frame send
*1
instruction
*2
Built-in CC-Link function
*1*2
iQ Sensor Solution function
CC-Link IE Field Network Basic function
*1 Availability depends on the version of the CPU module. ( Page 376, Appendix 2)
*2 Some models do not support those functions. For the availability, refer to the reference sections of each function.
*3 Only the Built-in Ethernet port LCPU supports this function.
For details on the special relay (SM) and special register (SD) used for each function, refer to the following.
MELSEC-L CPU Module User's Manual (Hardware Design, Maintenance and Inspection)
84
Enables MC protocol communications and the following functions by using built-in
Ethernet ports.
Communicates data (using TCP/UDP) with external devices connected on the Ethernet
network. The function is executed by dedicated instructions.
Works as a server of the FTP (File Transfer Protocol), which is used to transfer files
between the CPU module and external devices.
External devices with the FTP client function can directly access to the files in the CPU
module.
Works as a client of the FTP (File Transfer Protocol), which is used to transfer files
between the CPU module and external devices.
The CPU module can transfer files to the FTP server on a LAN by using the file transfer
function instructions.
Allows data communications between specified devices at the specified timing just by
doing simple settings from a programming tool.
Changes the IP address of the built-in Ethernet port by storing the value in the special
relay or special register, instead of setting the value in the built-in Ethernet port setting
parameter.
Communicates with the following devices that correspond to IP address specified via a
CC-Link IE Controller Network module or CC-Link IE Field Network module, using a
protocol such as the FTP or HTTP via a built-in Ethernet port from an Ethernet device
such as a personal computer.
• External devices on the CC-Link IE Field Network
• External devices on the Ethernet network, which are connected through the built-in
Ethernet ports
Sends/receives e-mail to/from an electronic device, such as a mobile phone, smart
phone, and personal computer. Device data can be read/written by describing an MC
protocol command in the body of the e-mail sent to the CPU module.
Sends MC protocol messages (QnA-compatible 3E frame) from the CPU module to
external devices connected on the Ethernet network.
Allows data communications over CC-Link.
A set of functions that can be used in iQ Sensor Solution
*1*3
A set of functions that can be used in CC-Link IE Field Network Basic
Description Reference
MELSEC-L CPU
Module User's Manual
(Built-In Ethernet
Function)
MELSEC-L CC-Link
System Master/Local
Module User's Manual
Page 234, Section
3.39
iQ Sensor Solution
Reference Manual
CC-Link IE Field
Network Basic
Reference Manual