(4) Setting transmission specifications
Set the transmission specifications of the serial communication function in the "Built-in Serial Setting" or "Adapter
Serial Setting" tab of the PLC parameter dialog box. ( Page 353, Appendix 1.2)
• Set "Serial Communication" to the "Select Function" in the "Built-in Serial Setting" or "Adapter Serial Setting"
tab.
• Set the adapter type
transmission wait time, and online change status.
*1
The adapter type can be set only in the "Adapter Serial Setting" tab.
*2
The station number can be set only when the RS-422/485 adapter is used.
*1
, sum check code, communication speed setting, station number setting
CHAPTER 3 CPU MODULE FUNCTIONS
*2
,
3
231