Batch Load - Mitsubishi Electric L02SCPU User's Manual And Reference

3.36.2

Batch load

This function reads the data saved in an SD memory card to the CPU module.
The following two methods are available to execute the function.
• Batch load using a display unit
• Auto loading using the special register (SD909)
(1) Execution timing
(a) Batch load using a display unit
The function is executed when the operation is performed on the display unit.
(b) Auto loading using SD909
The function is executed when:
• the CPU module is powered off and on
• the CPU module is reset
(2) Batch load target folders
(a) Batch load using a display unit
Folders under the "SaveLoad" folder in the SD memory card are targeted.
The name of these folders can be customized within 48 one-byte (24 two-byte) characters.
If the number of characters for the name exceeds 48 (or 24), the file will be excluded from the load target.
(b) Auto loading using SD909
Folders named "AutoLoad**"
*1 When the folder number is specified at "**" within the range between 01 and 99, the desired folder can be loaded.
Folders can also be loaded automatically without specifying the folder number.
For the target folder structure and target data, refer to the following.
• Folder structure:  Page 204, Section 3.36.1 (2) (b)
• Target data:  Page 204, Section 3.36.1 (3)
*1
under the "SaveLoad" folder in the SD memory card are targeted.
CHAPTER 3 CPU MODULE FUNCTIONS
3
209