Saving Configuration Template - JDS Uniphase HST-3000 Testing Manual

2.8 Saving Configuration File
Step Action
1. Save Config
2. Shutdown
3. Disconnect
Details
If this configuration file has not been previously stored, press the Home
Navigation key, then press the Configure Navigation key. Press the
Right Arrow key several times to display the Config Store menu, select
New Config, enter a Filename at the prompt, and press OK.
Press the green power button to turn the unit off.
Disconnect the USB Flash Drive from the HST-3000's USB port on the
top of the mainframe.
Technical Support tac@jdsu.com
Page 14 of 14
1 866 228-3762