HEIDENHAIN 548431-05 User Manual page 692

10
User functions
Tool database
Technology database (optional)
692
Tables and overviews | Technical information
For 250 tools
For 999 tools (optional)
Tool description can be entered for every tool
Automatic inspection of tool-tip position with
respect to the contour
Compensation of tool-tip position in the X/Y/Z plane
High-precision correction via handwheel, capturing
compensation values in the tool table
Automatic tool-tip and cutter radius compensation
Tool monitoring for lifetime of the insert (tool tip) or
the number of workpieces produced
Tool monitoring with automatic tool change after
tool insert wear (optional)
Management of multipoint tools (multiple inserts or
reference points)
Access to cutting data after definition of workpiece
material, cutting material and machining mode.
The control distinguishes between 16 machining
modes. Each workpiece-material/tool-material
combination includes the cutting speed, the main
and secondary feed rates, and the infeed for 16
machining modes.
Automatic determination of the machining modes
from the cycle or the machining unit
The cutting data are entered in the cycle or in the
unit as default values.
9 workpiece-material/tool-material combinations
(144 entries)
62 workpiece-material/tool-material combinations
(992 entries) (optional)
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017