Tool and technology database | Tool data
Reamer
Press the New tool soft key
Press the Special tool soft key
Press the special drilling tools soft key
Press the Reamer soft key
The help graphics illustrate the dimensions of the tools.
Special parameters for reamers:
DV: Hole diameter
DH: Stud diameter
AL: Cut-in length
Further tool parameters:
Further information:
For drilling operations at
Hole diameter DV parameter is used to calculate the
spindle speed.
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
"General tool parameters", Page 576
constant cutting
speed, the
8
587