Organization Mode Of Operation - HEIDENHAIN 548431-05 User Manual

9
9.1

Organization mode of operation

The Organization mode of operation offers various functions
for communication with other systems, data backup, setting of
parameters, and diagnosis.
The following functions are available:
Login code: Some parameter settings and functions may only
be accessed by authorized personnel. Users need to enter a
code number to log in to this mode
Parameter settings: Parameters enable you to adapt the
control to your specific requirements. The Machine parameter
menu provides functions to view and edit parameters
Transfer: The Transfer submode is used either for exchange of
data with other systems or for data backup. You can input and
output programs, parameters, and tool data
Diagnosis: The control provides diagnostic functions for
checking the system and for troubleshooting
The Configuration and Diagnosis functions can only be
accessed by authorized commissioning and service
personnel.
Software numbers
The following software numbers are displayed on the control's
screen after the Key soft key has been selected:
HEIDENHAIN
Control model: Designation of the control (managed by
HEIDENHAIN)
NC-SW: Number of the NC software (managed by
HEIDENHAIN)
NCK: Number of the NC software (managed by
HEIDENHAIN)
Functional safety
MC-FS: SKERN software of the MC
CC-FS: SKERN software of the CC number x
SPLC-SW: Number of the SPLC program
PLC
PLC-SW: Number or name of the PLC software (managed
by the machine tool builder)
The corresponding information will only be displayed if
functional safety (FS) is available on your machine.
604
Organization mode of operation | Organization mode of operation
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017