Tool and technology database | Tool data
Standard milling tools
Press the New tool soft key
Press the Milling tool soft key
The help graphics illustrate the dimensions of the tools.
Special parameters for standard milling tools:
DV: Milling diameter
AZ: No. of teeth
DD: Special corr.
SL: Cutting length
R2: Tool radius 2
DR2: Tool radius 2 oversize
Further tool parameters:
Further information:
For milling operations at
Cutter diameter DV is used to calculate the spindle
speed
For G193 Feed per tooth, the No. of teeth AZ
parameter is evaluated
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
"General tool parameters", Page 576
constant cutting
speed,
8
589