HEIDENHAIN 548431-05 User Manual page 601

Tool and technology database | Technology database
Editing cutting data:
Call the table with cutting data
With the arrow keys, select the cutting-data field
you want to edit
Press the Edit field soft key
Enter a value
Press the ENT key
Adding new cutting data:
Select any workpiece-material/cutting material combination
Press the New data record soft key
Technology editor submode opens the New
cutting data dialog.
Select the desired workpiece-material/cutting-
material combination
Decide whether an existing workpiece-material/
cutting-material combination should be used as
a template. Otherwise, the default value 0 is
assigned to all entries
Press the OK soft key
Deleting a data record with cutting data:
Select the workpiece-material/cutting-material combination
(data record) to be deleted
Press the Del. data record soft key
Technology editor submode asks you if you
really want to delete the data record
Press the YES soft key
Technology editor submode deletes the data
record of the given workpiece material / cutting
material combination.
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
8
601