Control Screen - HEIDENHAIN 548431-05 User Manual

2
2.2

Control screen

The control shows the data to be displayed in windows. Some
windows only appear when they are needed, for example, for
typing in entries.
In addition, the control shows the
display and the PLC soft key display
that appears in a field of the soft-key row is activated by pressing
the soft key directly below it.
If you are using a control with touch operation, you can
replace some keystrokes with hand gestures.
Further information:
Page 83
Operating mode line
The operating mode tabs (at the top of the screen) show the four
operating modes as well as the submodes.
Machine display
The machine display field (beneath the operating mode tabs) is
configurable. It shows all important information on axis positions,
feed rates, rotational speeds, and tools.
Other windows used
List and program
parameter lists, etc. are displayed
You can use the arrow keys to
select the list items to be edited.
Menu window: Displays the menu symbols
This window only appears on the screen in the Teach-in
submode and Machine operating mode
Input window / dialog
of a cycle, ICP element, DIN command, etc.
View the existing data, then delete or edit them in the dialog
window.
Help graphics: Input data (such as cycle parameters, tool data,
etc.) are explained with graphics.
The triple-arrow key
you to switch between the help graphics for inside and outside
machining (only for cycle programming).
Simulation window: The simulation window shows a graphic
representation of the contour elements and a simulation of the
tool movements.
This way, you can check cycles, entire cycle programs, and DIN
programs.
graphics: Display of the contour during ICP
ICP contour
programming
DIN editing window: Display of the DIN program during DIN
programming
Error window: Display of encountered errors and warnings
62
type of operation, the
on the screen. Each function
"Operating the Touchscreen",
windows: Here, program, tool, and
navigate within the list and
window: For entering the parameters
(at the left edge of the screen) allows
Basics of operation | Control screen
soft-key
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017