HEIDENHAIN 548431-05 User Manual page 588

8
Tap
Press the New tool soft key
Press the Tap soft key
The help graphics illustrate the dimensions of the tools.
Special parameters for taps:
DV: Thread diameter
HG: Thread pitch
AL: Cut-in length
Further tool parameters:
Further information:
The Thread pitch HG is evaluated if the corresponding
parameter is not defined in the tapping cycle.
588
"General tool parameters", Page 576
Tool and technology database | Tool data
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017