HEIDENHAIN 548431-05 User Manual page 366

5
Teach-in | Milling cycles
Cycle run:
1 Activate the C axis and position at Spindle angle C at rapid
traverse (only in Teach-in submode)
2 Calculate the proportioning of cuts
3 Approach at Approach feed FZ
4 Machine to the end point of slot
5 Approach at Approach feed FZ
6 Machine to the starting point of slot
7 Repeat 3 to 6 until the milling depth is reached
8 Position to the Start point X and deactivate the C axis
9 Move to the Tool change point according to the setting in G14
366
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017