HEIDENHAIN 548431-05 User Manual page 298

5
WP: No. of spindle – Displays which workpiece spindle is used
to execute the cycle (machine-dependent)
Main drive
Opposing spindle for rear-face machining
BW: Angle in the B axis (machine-dependent)
CW: Reverse the tool (machine-dependent)
HC: Shoe brake (machine-dependent)
DF: Miscellaneous function (machine-dependent)
Type of machining for technology database access:
Recess turning
Cycle run:
1 Calculate the proportioning of cuts
2 Approach the workpiece from the Start point for the first pass
3 Execute the first cut (recessing)
4 Machine perpendicularly to the recessing direction (turning)
5 Repeat 3 to 4 until the defined area has been machined
6 Return to the Start point on a paraxial path
7 Move to the Tool change point according to the setting in G14
298
Teach-in | Recessing cycles
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017