HEIDENHAIN 548431-05 User Manual page 474

6
Example: In the DIN contour description, the milling depth is
programmed in G308 and in the figure definition. If this figure is
changed with ICP, ICP overwrites the milling depth from G308
with the milling depth from the figure. When saving, ICP saves the
milling depth in G308. The G code of the figure is saved without
milling depth.
Example: Rectangle on face
...
FRONT Z0
N 100 G308 ID"FRONT_1" P-5
N 101 G305 XK40 YK10 A0 K30 B15
N 102 G309
...
Example: Nested figures
...
FRONT Z0
N 100 G308 ID"FRONT_2" P-5
N 101 G307 XK-40 YK-40 Q5 A0 K-50
N 102 G308 ID"FRONT_12" P-3
N 103 G301 XK-35 YK-40 A30 K40 B20
N 104 G309
N 105 G309
...
474
ICP programming | C-axis and Y-axis machining in smart.Turn mode of operation
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017