Table of Contents
Advertisement
6
Changing the length of the contour element
Changing the length of the contour element:
Select the Manipulate menu item
The menu displays functions for trimming,
editing and deleting contours
Select the Modify menu item
Select the Contour element menu item
Select the contour element to be edited
Present the selected contour element for editing
Make the changes
Load the changes
The contour or the possible solutions are
displayed for inspection. Changes in form
elements and unresolved elements are loaded
immediately (original contour in yellow, changed
contour in red for comparison)
Load the desired solution
Changing the paraxial line
When
a paraxial line, an additional soft key is offered
changing
with which you can change the second end point as well. From an
originally straight line you can make a diagonal in order to make
corrections.
Changing the paraxial line:
Change the
menu item repeatedly, you can select the
direction of the diagonal
442
fixed
end point. By selecting the
ICP programming | Editing ICP contours
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Advertisement
Chapters
Table of Contents
