Manual Reset - ALLIANCE HWNLX2SP111CW01 Manual

This feature allows the owner to reset the washer
control's programming data to the factory default
settings by pressing a sequence of pads on the control.
For an explanation of the Factory Default Settings,
refer to Default Washer Settings.
How to Enter Manual Reset
1. Control must be in Manual Mode to start.
Refer to Entering the Manual Mode.
2. Press the DELICATES ( ) or the COLD ( )
keypad until "rSEt" appears.
3. Press the START (enter) keypad. The control will
be blank until the programming is complete.
Once the program has been reset, the control will
revert back to the Manual Mode.
86

Manual Reset

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
202065R6