Error Codes - ALLIANCE HWNLX2SP111CW01 Manual

Following is a list of possible error codes for an
electronic control. Errors beginning with "
external device Infra-red communication errors. Errors
beginning with " " refer to card reader errors. All
EC
other errors refer to machine errors.
Display
Transmission Failure
EI01
Device Time-out
EI02
EI03 Invalid Command Code
EI04 Expecting Upload Request
Invalid or Out-of-Range Data
EI05
EI09 CRC-16 Error
EI0A Invalid Machine Type
EI0C Time-out Exceeded
EI0E Encryption Error
EI0F Invalid Wake-up or Infra-red Disabled
EC02 Time-out Error
EC03 Invalid Command Code
EC05 Invalid or Out-of-Range Data
EC11 No Card Reader Initialization
No Communication
EC18
EC19 No Card Reader Communication
94

Error Codes

" refer to
EI
Description
Table 14 (continued)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Cause/
Corrective Action
Communication failure. Re-aim external device and try
again.
Communication failure. Re-aim external device and try
again.
Incorrect machine type. Before downloading, ensure
data is for current machine type.
Communication failure. Re-aim external device and try
again.
Incorrect machine type. Before downloading, ensure
data is for current machine type.
Communication failure. Re-aim external device and try
again.
Incorrect machine type. Before downloading, ensure
data is for current machine type.
Communication error. Re-aim external device and try
again.
Incorrect machine type. Before downloading, ensure
data is for current machine type.
Communication failure or infra-red is disabled.
Manually enable infra-red on control or re-aim external
device and try again.
Communication failure. Try card again.
Incorrect machine type. Before downloading, ensure
data is for current machine type.
Incorrect machine type. Before downloading, ensure
data is for current machine type.
Communication is valid, but there is no card reader
initialization. Power down, power up and try again.
Card reader initialized, communication lost. Power
down, power up and try again. If error persists, replace
control or card reader.
Communication failure. Power down, power up and try
again. If error persists, replace control or card reader.
202065R6