Manual Reset - ALLIANCE BF3LLFSG401UN01 Programming Manual

This feature allows the owner to reset the washer
control's programming data to the factory default
settings by pressing a sequence of pads on the control.
For an explanation of the Factory Default Settings,
refer to Default Washer Settings.
How to Enter Manual Reset
1. Control must be in Manual Mode to start.
Refer to Entering the Manual Mode.
2. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad until "rSEt" appears.
3. Press the START (enter) keypad. The control will
be blank until the programming is complete.
Once the program has been reset, the control will
display the next Manual Mode option, "dIAg".
84

Manual Reset

© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT 802953