Reset Menu - ALLIANCE Speed Queen Programming

Figure 41
If enabled (refer to Globals Menu), the Reset Menu allows the
user to reset the control's global and cycle programming data to
the factory default setting. To enter Manual Reset Mode:
1. To access, simultaneously press the
Service Door open and Coin Vault closed to enter the System
Menu.
2. Press the or keypads to highlight Reset.
3. Press the
keypad to enter the Reset Menu.
4. Press the or keypads to highlight GLOBALS, CYCLES
or ALL and press keypad.
5. The Save Changes Menu will be displayed. Confirm reset by
accepting or canceling change.
If resetting CYCLES, the control resets all machine cycles to fac-
tory default.
If resetting GLOBALS, the control resets the programming pa-
rameters to factory default. Refer to Table 15 .
If resetting ALL, the control resets the programming parameters
and machine cycles back to factory default.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT

Reset Menu

and keypads with
80
Reset Menu
Part No. 806526ENR2