Start Pulse Operation - ALLIANCE HWNLX2SP111CW01 Manual

Special Features

Start Pulse Operation

The control will accept pulses from optional payment
systems. The machine can be programmed to receive a
single start pulse or multiple start pulses, or the Start
Pulse Option can be turned off. The Start Pulse Mode
allows the machine to go from the Ready Mode to the
Start Mode after single or multiple pulses are received.
Service Door and Coin Vault
Openings
The control will capture the times and dates of the
openings of the Coin Vault and the Service Door. The
information is saved in memory. An open service door
combined with various keypad presses allows the
control to enter manual modes of operation if the
Break-In Alarm is not on. These modes include Manual
Programming, Audit Collection and Diagnostics.
Special Vend
This feature allows the owner to program the control
to allow programmable vend prices for specific hours
and dates.
For details on programming Special Vend, refer to
Programming Control.
12
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
OPL Mode
This feature allows the user to start a cycle without
satisfying the vend price. While running a cycle in
OPL Mode, pressing the START keypad advances to
the next cycle step. Pressing the HOT and WARM
keypads together will end the cycle.
For details on enabling OPL Mode, refer to
Programming Control.
Drop-Off Mode
This feature allows the owner to limit machine use to
an attendant without requiring vend. Starting the
machine will require the correct sequence of four
keypad presses as programmed by an external device,
a card reader or a network. While running a cycle in
Drop-Off Mode, pressing the START keypad advances
to the next cycle step. Pressing the HOT and WARM
keys together will end the cycle.
For details on enabling Drop-Off Mode, refer to
Programming Control.
Low Power/Auto-Shutdown Option
This feature allows the owner to program the control
to shut down or enter a low power consumption mode
based on programmable times and dates if either of
these options are enabled.
For details on programming the Low Power/Auto-
Shutdown option, refer to Programming Control.
202065R6