Communications Mode - ALLIANCE HWNLX2SP111CW01 Manual

Infra-red Communications
The Infra-red Communications feature allows the
washer control to communicate with an external
device. The washer control can be programmed and
have its data read without using the keypad. It may
also be used to start and stop various diagnostic tests.
How to Begin Communications with An
External Device
The control will go blank and the display will show
"-C-" until the communication is complete. The
display will return to the previous mode. If an error
occurs that terminates communication, the display will
show "EIXX" ("XX" represents the error code).
NOTE: The Infra-red Communications option
must be turned on. Refer to option 33 in
Programming Control.
202065R6

Communications Mode

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Card Reader Communications
(Card Models Only)
The Card Reader Communications feature allows the
washer control to communicate with the card reader.
The washer control can be programmed and have its
data read without using the keypad.
Network Communications
The Network Communications feature allows the
washer control to communicate with a network. The
washer control can be programmed and have its data
read without using the keypad.
99