Vend Price #1 "Ats1 - ALLIANCE HWNLX2SP111CW01 Manual

1.

Vend Price #1 "AtS1"

This option allows the owner to set the vend price for a
normal/hot wash. This vend price will be shown in the
display when NORMAL and HOT are selected.
How to Program the Vend Price #1
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES ( ) or the COLD ( )
keypad until "Prog" appears in the display. Press
the START (enter) keypad.
3. "AtS1" will appear in the display. Press the
START (enter) keypad.
4. There are five digits in the Vend Price #1. The
fifth digit will appear in the display and will flash
one second on, one second off. Refer to Figure 4.
NOTE: If the vend price is 10000 or more, the fifth
digit is "1-6". If the vend price is 9999 or less, the
fifth digit is "0".
Figure 4
5. Press the DELICATES ( ) or the COLD ( )
keypad to increase or decrease the value of the
fifth digit.
NOTE: The vend price can be set from 1 to 65,535.
The factory default setting is 200.
202065R6
CHM507R
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
6. Press the START (enter) keypad to enter the fifth
digit and display remaining four digits. The
active digit will flash one second on and one
second off.
NOTE: To go back to the current programmable
option without changing the value, press the
WARM (<) keypad.
7. Press the DELICATES ( ) or the COLD ( )
keypad to increase or decrease the value of the
active digit and the START (enter) keypad to
enter the value of the digit and advance to the
next digit.
8. Press the START (enter) keypad with the last
active digit. The next option, "dEn1", will
appear in the display.
NOTE: To program "dEn1" (Coin #1 Value), refer
to option 2. To program other options, refer to the
appropriate section.
How to Exit Programming Feature
Press the WARM (<) keypad until the control returns
to Ready Mode.
Programming Control
25