ALLIANCE HWNLX2SP111CW01 Manual page 79

How to Program Delicate Wash Agitate
Time "CP9"
This option allows the owner to set the amount of
wash agitate time for the Delicate cycle.
1. Press the DELICATES ( ) or the COLD ( )
keypad to scroll through the programmable Cycle
Programming options until "CP9" appears in the
display.
2. When "CP9" appears in the display, press the
START (enter) keypad. The current number of
minutes set for the Delicate Wash Agitate Time
will appear in the display.
3. Press the DELICATES ( ) or the COLD ( )
keypad to increase or decrease the current
number of minutes shown in the display to the
desired number of minutes.
NOTE: The Delicate Wash Agitate Time can be set
from zero (0) to ten (10) minutes. The factory
default setting is ten (10).
4. Press the START (enter) keypad when the correct
number of minutes appears in the display. The
next Cycle Programming option, "CP10", will
appear in the display.
NOTE: To program "CP10" (Delicate Extra Rinse
Agitate Time), continue to next Cycle
Programming option. To program other options,
press the WARM (<) keypad and refer to the
appropriate section.
How to Exit Programming Feature
Press the WARM (<) keypad until the control returns
to Ready Mode.
202065R6
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
How to Program Delicate Extra Rinse
Agitate Time "CP10"
This option allows the owner to set the amount of
extra rinse agitate time for the Delicate cycle.
1. Press the DELICATES ( ) or the COLD ( )
keypad to scroll through the programmable Cycle
Programming options until "CP10" appears in
the display.
2. When "CP10" appears in the display, press the
START (enter) keypad. The current number of
minutes set for the Delicate Extra Rinse Agitate
Time will appear in the display.
3. Press the DELICATES ( ) or the COLD ( )
keypad to increase or decrease the current
number of minutes shown in the display to the
desired number of minutes.
NOTE: The Delicate Extra Rinse Agitate Time can
be set from zero (0) to ten (10) minutes. The factory
default setting is zero (0).
4. Press the START (enter) keypad when the correct
number of minutes appears in the display. The
next Cycle Programming option, "CP11", will
appear in the display.
NOTE: To program "CP11" (Delicate Rinse
Agitate Time), continue to next Cycle
Programming option. To program other options,
press the WARM (<) keypad and refer to the
appropriate section.
How to Exit Programming Feature
Press the WARM (<) keypad until the control returns
to Ready Mode.
Programming Control
77