Set Real-Time Clock "Rtc - ALLIANCE HWNLX2SP111CW01 Manual

20. Set Real-Time Clock "rtC-"

This option allows the owner to set the controls
internal clock to the correct time and date.
How to Program the Time and Date
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES ( ) or the COLD ( )
keypad until "Prog" appears in the display. Press
the START (enter) keypad and "AtS1" will
appear in the display.
3. Press the DELICATES ( ) or the COLD ( )
keypad to scroll through the programmable
options until "rtC-" appears in the display. Press
the START keypad and "
display.
4. Press the DELICATES ( ) or the COLD ( )
keypad to scroll through the programmable
options. Refer to Table 6.
"rtC1"
"rtC2"
"rtC3"
"rtC4"
"rtC5"
"rtC6"
"rtC7"
Table 6
5. When the desired option appears in the display,
press the START (enter) keypad. The current
value will appear in the display.
6. Press the DELICATES ( ) or the COLD ( )
keypad to increase or decrease the minutes,
hours, day of week, date of month, month or year
to the correct time or date.
202065R6
" will appear in the
rtC1
Programs Minutes
Programs Hours
Programs Day of Week
Programs Date of Month
Programs Month
Programs Year
Programs Daylight Savings
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
NOTE: The hours will be displayed in military
time. For day of week , Sunday is considered day
one (1), Monday is day two (2) and so on. For year,
the year 2000 is "0", the year 2001 is "1" and so on.
If programming Daylight Savings, "rtC7", "on"
(factory default setting) enables Daylight Savings
Time and "oFF" disables Daylight Savings Time.
7. Press the START (enter) keypad when the correct
time or date appears in the display. The next Set
Real-Time Clock option will appear in the
display.
NOTE: To program "SPA-" (Special Vend A Data),
press the WARM (<) keypad to return to the main
programming options list and refer to option 21. To
program other options, refer to the appropriate
section.
How to Exit Programming Feature
Press the WARM (<) keypad until the control returns
to Ready Mode.
Programming Control
45