ALLIANCE HWNLX2SP111CW01 Manual page 54

Programming Control
How to Program Special Vend A Length in
Hours "SA04"
This option allows the owner to set the length in hours
for Special Vend A.
1. Press the DELICATES ( ) or the COLD ( )
keypad to scroll through the programmable
Special Vend A options until "SA04" appears in
the display.
2. When "SA04" appears in the display, press the
START (enter) keypad. The current length in
hours will appear in the display.
3. Press the DELICATES ( ) or the COLD ( )
keypad to increase or decrease the current length
of hours to the desired number of hours.
4. Press the START (enter) keypad when the correct
hour appears in the display. The next Special Vend
A option, "SA05", will appear in the display.
NOTE: To program "SA05" (Special Vend A Start
Month), continue to next Special Vend A option. To
program other options, press the WARM (<)
keypad and refer to the appropriate section.
How to Exit Programming Feature
Press the WARM (<) keypad until the control returns
to Ready Mode.
52
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
How to Program Special Vend A Start
Month "SA05"
This option allows the owner to set the month that
Special Vend A will begin.
NOTE: If Special Vend A Start Month, Start Date,
End Month, or End Date are programmed to zero
(default is zero), the Special Vend A will be active
every week on the days programmed in Table 7.
1. Press the DELICATES ( ) or the COLD ( )
keypad to scroll through the programmable
Special Vend A options until "SA05" appears in
the display.
2. When "SA05" appears in the display, press the
START (enter) keypad. The current start month
will appear in the display.
3. Press the DELICATES ( ) or the COLD ( )
keypad to increase or decrease the start month to
the desired month.
If "0" is selected and Special Vend A is on,
Special Vend A will occur at the time and days of
week selected, regardless of the month.
4. Press the START (enter) keypad when the correct
month appears in the display. The next Special
Vend A option, "SA06", will appear in the
display.
NOTE: To program "SA06" (Special Vend A Start
Date), continue to next Special Vend A option. To
program other options, press the WARM (<)
keypad and refer to the appropriate section.
How to Exit Programming Feature
Press the WARM (<) keypad until the control returns
to Ready Mode.
202065R6