ALLIANCE HWNLX2SP111CW01 Manual page 56

Programming Control
How to Program Special Vend A End
Month "SA08"
This option allows the owner to set the month that
Special Vend A will end.
1. Press the DELICATES ( ) or the COLD ( )
keypad to scroll through the programmable
Special Vend A options until "SA08" appears in
the display.
2. When "SA08" appears in the display, press the
START (enter) keypad. The current end month
will appear in the display.
3. Press the DELICATES ( ) or the COLD ( )
keypad to increase or decrease the end month to
the desired month.
If "0" is selected and Special Vend A is on,
Special Vend A will occur at the time and day of
week selected, regardless of the month.
4. Press the START (enter) keypad when the correct
month appears in the display. The next Special
Vend A option, "SA09", will appear in the
display.
NOTE: To program "SA09" (Special Vend A End
Date), continue to next Special Vend A option. To
program other options, press the WARM (<)
keypad and refer to the appropriate section.
How to Exit Programming Feature
Press the WARM (<) keypad until the control returns
to Ready Mode.
54
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
How to Program Special Vend A End Date
"SA09"
This option allows the owner to set the date that
Special Vend A will end.
1. Press the DELICATES ( ) or the COLD ( )
keypad to scroll through the programmable
Special Vend A options until "SA09" appears in
the display.
2. When "SA09" appears in the display, press the
START (enter) keypad. The current end date will
appear in the display.
3. Press the DELICATES ( ) or the COLD ( )
keypad to increase or decrease the end date to the
desired date.
If "0" is selected and Special Vend A is on,
Special Vend A will occur at the time and days of
week selected, regardless of the date.
4. Press the START (enter) keypad when the correct
date appears in the display. The next Special Vend
A option, "SA10", will appear in the display.
NOTE: To program "SA10" (Special Vend A End
Year), continue to next Special Vend A option. To
program other options, press the WARM (<)
keypad and refer to the appropriate section.
How to Exit Programming Feature
Press the WARM (<) keypad until the control returns
to Ready Mode.
202065R6