Low Power/Auto Shutdown C Days Enable "Lpsc - ALLIANCE HWNLX2SP111CW01 Manual

30. Low Power/Auto Shutdown C
Days Enable "LPSC"
This option allows the owner to set Low Power/Auto
Shutdown on certain day(s) of the week. Low Power
or Auto Shutdown duration are programmed using an
external device or network.
How to Program the Low Power/Auto
Shutdown C Days Enable
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES ( ) or the COLD ( )
keypad until "Prog" appears in the display. Press
the START (enter) keypad and "AtS1" will
appear in the display.
3. Press the DELICATES ( ) or the COLD ( )
keypad to scroll through the programmable
options until "LPSC" appears in the display.
4. When "LPSC" appears in the display, press the
START (enter) keypad. The current Low Power/
Auto Shutdown C Days Enable status will appear
in the display.
"on" = Option Enabled
"oFF" = Option Disabled
(factory default setting)
5. Press the DELICATES ( ) or the COLD ( )
keypad to change the current status.
6. Press the START (enter) keypad when the correct
status appears in the display. The next option,
"LPSd", will appear in the display.
NOTE: To program "LPSd" (Low Power/Auto
Shutdown D Days Enable), refer to option 31. To
program other options, refer to the appropriate
section.
How to Exit Programming Feature
Press the WARM (<) keypad until the control returns
to Ready Mode.
202065R6
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
31. Low Power/Auto Shutdown D
Days Enable "LPSd"
This option allows the owner to set Low Power/Auto
Shutdown on certain day(s) of the week. Low Power
or Auto Shutdown duration are programmed using an
external device or network.
How to Program the Low Power/Auto
Shutdown D Days Enable
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES ( ) or the COLD ( )
keypad until "Prog" appears in the display. Press
the START (enter) keypad and "AtS1" will
appear in the display.
3. Press the DELICATES ( ) or the COLD ( )
keypad to scroll through the programmable
options until "LPSd" appears in the display.
4. When "LPSd" appears in the display, press the
START (enter) keypad. The current Low Power/
Auto Shutdown D Days Enable status will appear
in the display.
"on" = Option Enabled
"oFF" = Option Disabled
(factory default setting)
5. Press the DELICATES ( ) or the COLD ( )
keypad to change the current status.
6. Press the START (enter) keypad when the correct
status appears in the display. The next option,
"PFr", will appear in the display.
NOTE: To program "PFr" (Power Fail Reset),
refer to option 32. To program other options, refer
to the appropriate section.
How to Exit Programming Feature
Press the WARM (<) keypad until the control returns
to Ready Mode.
Programming Control
81