Default Cycle "Dcyc - ALLIANCE HWNLX2SP111CW01 Manual

Table of Contents

Advertisement

7.

Default Cycle "dCYC"

This option allows the owner to set the default cycle
and temperature the machine will enter when in the
Ready Mode. When programming the default cycle,
refer to Table 3.
How to Program Default Cycle
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES ( ) or the COLD ( )
keypad until "Prog" appears in the display. Press
the START (enter) keypad and "AtS1" will
appear in the display.
3. Press the DELICATES ( ) or the COLD ( )
keypad to scroll through the programmable
options until "dCYC" appears in the display.
4. When "dCYC" appears in the display, press the
START (enter) keypad. A number will appear in
the display. This number corresponds to the
current default cycle value. Refer to Table 3.
5. Press the DELICATES ( ) or the COLD ( )
keypad to increase or decrease the current number
to the desired number selected from Table 3.
6. Press the START (enter) keypad when the correct
number appears in the display. The next option,
"oPL", will appear in the display.
NOTE: To program "oPL" (OPL Mode), refer to
option 8. To program other options, refer to the
appropriate section.
How to Exit Programming Feature
Press the WARM (<) keypad until the control returns
to Ready Mode.
202065R6
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
How to Read Table 3
To determine the correct number required to program
Default Cycle, use the following table. The Default
Value column contains the number required in step 5.
The other columns correspond to cycle type and wash
temperature.
The default cycle programmed at the factory is 5,
Perm Press/Warm.
The corresponding cycle and temperature LEDs will
be lit while selecting a default cycle. For example,
when the display shows "7", the Delicate and Hot
LEDs are lit.
"dCYC"
Default
Cycle Type
Value
1
Normal
2
Normal
3
Normal
4
Perm Press
5*
Perm Press
6
Perm Press
7
Delicate
8
Delicate
9
Delicate
* Factory default setting.
Table 3
Programming Control
Wash
Temperature
Hot
Warm
Cold
Hot
Warm
Cold
Hot
Warm
Cold
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents