Special Vend A Data "Spa - ALLIANCE HWNLX2SP111CW01 Manual

Programming Control

21. Special Vend A Data "SPA-"

This option allows the owner to set the day or days of
a special vend.
Special Vend A is used to change the standard vend
prices for special occasions. The special vend can be
programmed to start and end on a specific day or days
of the week.
The owner may also turn the Special Vend A option on
or off if desired.
The factory default setting for all Special Vend A
programming options is zero (0).
How to Program Special Vend A Days
Enable "SA01"
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES ( ) or the COLD ( )
keypad until "Prog" appears in the display. Press
the START (enter) keypad and "AtS1" will
appear in the display.
3. Press the DELICATES ( ) or the COLD ( )
keypad to scroll through the programmable
options until "SPA-" appears in the display. Press
the START (enter) keypad and "SA01" will
appear in the display.
4. When "SA01" appears in the display, press the
START (enter) keypad. A number will appear in
the display that corresponds to the current
Special Vend A Days Enable Programming
Value.
5. Locate the desired number in the first column of
Table 7 on the following pages.
46
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
6. Press the DELICATES ( ) or the COLD ( )
keypad to increase or decrease the current
number until correct.
7. Press the START (enter) keypad when the correct
number appears in the display. The next Special
Vend A option, "SA02", will appear in the
display.
NOTE: To program "SA02" (Special Vend A Start
Hour), continue to the next Special Vend A option.
To program other options, press the WARM (<)
keypad and refer to the appropriate section.
How to Exit Programming Feature
Press the WARM (<) keypad until the control returns
to Ready Mode.
202065R6