Vend Price #8 "Ats8 - ALLIANCE HWNLX2SP111CW01 Manual

18. Vend Price #8 "AtS8"

This option allows the owner to set the vend price for a
delicate/warm wash. This vend price will be shown in
the display when DELICATE and WARM are
selected.
How to Program the Vend Price #8
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES ( ) or the COLD ( )
keypad until "Prog" appears in the display. Press
the START (enter) keypad and "AtS1" will
appear in the display.
3. Press the DELICATES ( ) or the COLD ( )
keypad to scroll through the programmable
options until "AtS8" appears in the display.
4. When "AtS8" appears in the display, press the
START (enter) keypad. There are five digits in
the Vend Price #8. The fifth digit will appear in
the display and will flash one second on, one
second off. Refer to Figure 14.
NOTE: If the vend price is 10000 or more, the fifth
digit is "1-6". If the vend price is 9999 or less, the
fifth digit is "0".
Figure 14
5. Press the DELICATES ( ) or the COLD ( )
keypad to increase or decrease the value of the
fifth digit.
NOTE: The vend price can be set from 1 to 65,535.
The factory default setting is 200.
202065R6
CHM507R
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
6. Press the START (enter) keypad to enter the fifth
digit and display remaining four digits. The
active digit will flash one second on and one
second off.
NOTE: To go back to the current programmable
option without changing the value, press the
WARM (<) keypad.
7. Press the DELICATES ( ) or the COLD ( )
keypad to increase or decrease the value of the
active digit and the START (enter) keypad to
enter the value of the digit and advance to the
next digit.
8. Press the START (enter) keypad with the last
active digit. The next option, "AtS9", will appear
in the display.
NOTE: To program "AtS9" (Vend Price #9), refer
to option 19. To program other options, refer to the
appropriate section.
How to Exit Programming Feature
Press the WARM (<) keypad until the control returns
to Ready Mode.
Programming Control
43