ALLIANCE HWNLX2SP111CW01 Manual page 67

How to Program Special Vend A Added
Wash Agitate Time "SA20"
This option allows the owner to add time to the wash
agitate part of the cycle in Special Vend A.
1. Press the DELICATES ( ) or the COLD ( )
keypad to scroll through the programmable
Special Vend A options until "SA20" appears in
the display.
2. When "SA20" appears in the display, press the
START (enter) keypad.
3. Press the DELICATES ( ) or the COLD ( )
keypad to increase or decrease the number of
minutes displayed to the desired number of added
minutes.
NOTE: The Special Vend A Added Wash Agitate
Time can be set from zero "0" to ten "10" minutes.
4. Press the START (enter) keypad when the correct
number of minutes appears in the display. The
next Special Vend A option, "SA21", will appear
in the display.
NOTE: To program "SA21" (Special Vend A
Subtracted Wash Agitate Time), continue to next
Special Vend A option. To program other options,
press the WARM (<) keypad and refer to the
appropriate section.
How to Exit Programming Feature
Press the WARM (<) keypad until the control returns
to Ready Mode.
202065R6
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
How to Program Special Vend A
Subtracted Wash Agitate Time "SA21"
This option allows the owner to subtract time from the
wash agitate part of the cycle in Special Vend A.
1. Press the DELICATES ( ) or the COLD ( )
keypad to scroll through the programmable
Special Vend A options until "SA21" appears in
the display.
2. When "SA21" appears in the display, press the
START (enter) keypad.
3. Press the DELICATES ( ) or the COLD ( )
keypad to increase or decrease the number of
minutes displayed to the desired number of
subtracted minutes.
NOTE: The Special Vend A Subtracted Wash
Agitate Time can be set from zero "0" to ten "10"
minutes.
4. Press the START (enter) keypad when the correct
number of minutes appears in the display. The
next Special Vend A option, "SA01", will appear
in the display.
"
SPb-
NOTE: To program
Enable), press the WARM (<) keypad and refer to
option 22. To program other options, refer to the
appropriate section.
How to Exit Programming Feature
Press the WARM (<) keypad until the control returns
to Ready Mode.
Programming Control
"
(Special Vend B
65