Xconfiguration Network [1] Ieee8021X Useclientcertificate; Xconfiguration Network [1] Ieee8021X Identity; Xconfiguration Network [1] Ieee8021X Password; Xconfiguration Network [1] Ieee8021X Anonymousidentity - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xConfiguration Network [1] IEEE8021X UseClientCertificate

Authentication using a private key/certificate pair during an IEEE802.1x connection. The authen-
tication X.509 certificate must be uploaded to the video system. This can be done from the
web interface.
Requires user role: ADMIN, USER
Default value: Off
USAGE:
xConfiguration Network n IEEE8021X UseClientCertificate:
where
: Index that identifies the network. Range: 1..1
n
: Off/On
UseClientCertificate
Off: When set to Off client-side authentication is not used (only server-side).
On: When set to On the client (video system) will perform a mutual authentication TLS
handshake with the server.

xConfiguration Network [1] IEEE8021X Identity

Define the user name for 802.1X authentication.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration Network n IEEE8021X Identity: "Identity"
where
: Index that identifies the network. Range: 1..1
n
: String (0, 64)
Identity
The user name for 802.1X authentication.
SX20 Codec API Reference Guide CE9.1, JUNE 2017.
D15316.07
About the API xConfiguration xConfiguration
UseClientCertificate
xCommand

xConfiguration Network [1] IEEE8021X Password

Define the password for 802.1X authentication.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration Network n IEEE8021X Password: "Password"
where
: Index that identifies the network. Range: 1..1
n
: String (0, 50)
Password
The password for 802.1X authentication.

xConfiguration Network [1] IEEE8021X AnonymousIdentity

The 802.1X Anonymous ID string is to be used as unencrypted identity with EAP (Extensible
Authentication Protocol) types that support different tunneled identity, like EAP-PEAP and
EAP-TTLS. If set, the anonymous ID will be used for the initial (unencrypted) EAP Identity
Request.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration Network n IEEE8021X AnonymousIdentity: "AnonymousIdentity"
where
: Index that identifies the network. Range: 1..1
n
: String (0, 64)
AnonymousIdentity
The 802.1X Anonymous ID string.
48
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.