Xconfiguration Audio Input Microphone [1 - Cisco TelePresence MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction
xConfiguration Audio Input Microphone [1..8] EchoControl Mode
The echo canceller continuously adjusts itself to the audio characteristics of the room and
compensate for any changes it detects in the audio environment. If the changes in the audio
conditions are very significant the echo canceller may take a second or two to re-adjust.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration Audio Input Microphone
where
Mode
: Off/On
Off: Echo Control should be switched Off if external echo cancellation or playback
equipment is used.
On: Echo Control is normally set to On to prevent the far end from hearing their own
audio. Once selected, echo cancellation is active at all times.
xConfiguration Audio Input Microphone [1..8] EchoControl NoiseReduction
The system has a built-in noise reduction which reduces constant background noise (for
example noise from air-conditioning systems, cooling fans etc.). In addition, a high pass filter
(Humfilter) reduces very low frequency noise. Requires the Echo Control Mode to be enabled
for the microphone.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration Audio Input Microphone
NoiseReduction
where
NoiseReduction
: Off/On
Off: Turn off the Noise Reduction.
On: The Noise Reduction should be enabled in the presence of low frequency noise.
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
D15335.02
About the API xConfiguration xConfiguration
n EchoControl Mode: Mode
n EchoControl NoiseReduction:
xCommand
xConfiguration Audio Input Microphone [1..8] EchoControl Dereverberation
The system has built-in signal processing to reduce the effect of room reverberation. Requires
the Echo Control Mode to be enabled for the microphone.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration Audio Input Microphone
Dereverberation
where
Dereverberation
: Off/On
Off: Turn off the dereverberation.
On: Turn on the dereverberation.
xConfiguration Audio Input Microphone [1..8] Equalizer ID
Select the equalizer ID of the source that is connected to the microphone input.
Requires user role: ADMIN
Default value: 1
USAGE:
xConfiguration Audio Input Microphone
where
ID
: Integer (1..8)
Set the equalizer ID.
39
API Reference Guide
xStatus Appendices
n EchoControl Dereverberation:
n Equalizer ID: ID
Copyright © 2016 Cisco Systems, Inc. All rights reserved.