Audio Input Line [1; How To Find The Ip Address Audio Input Line [1; Select The Settings Icon (Cogwheel) In The Status Bar Of Audio Input Line [1; Select System Information. Audio Input Line [1 - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80

Introduction
Audio Input Line [1..4] Equalizer ID
Select the equalizer ID of the audio source that is connected to the line input.
Requires user role: ADMIN, INTEGRATOR
Default value: 1
Value space: Integer (1..8)
Set the equalizer ID.
Audio Input Line [1..4] Equalizer Mode
Define the equalizer mode for the audio source that is connected to the line input.
Requires user role: ADMIN, INTEGRATOR
Default value: Off
Value space: Off/On
Off: No equalizer.
On: Enable the equalizer for the audio source that is connected to the line input.
Audio Input Line [1..4] VideoAssociation MuteOnInactiveVideo
The audio source can be associated with a video source on the video input connector, and
you can determine whether to play or mute audio depending on whether the video source is
presented or not.
Requires user role: ADMIN, INTEGRATOR
Default value: Line [1, 2]: On Line[3, 4]: Off
Value space: Off/On
Off: The audio source is not associated with a video source. The audio will be played
locally and to far end regardless of whether the video source is presented.
On: The audio source is associated with a video source. The audio will be played (locally
and to far end) when the associated video source is presented. The audio will be muted
when the video source is not presented.
D15328.07 SX80 Administrator Guide CE9.1, JUNE 2017.
Configuration Peripherals Maintenance
Audio Input Line [1..4] VideoAssociation VideoInputSource
The audio source can be associated with a video source on the video input connector.
Requires user role: ADMIN, INTEGRATOR
Default value: Line [1, 2]: 4 Line[3, 4]: 1
Value space: 1/2/3/4/5
Select the video input connector to associate the audio source with.
Audio Input Line [1..4] Channel
Define whether the audio source on the line input is a mono signal or part of a multichannel
signal.
Requires user role: ADMIN, INTEGRATOR
Default value: Left
Value space: Left/Mono/Right
Left: The Audio Line input signal is the left channel of a stereo signal.
Mono: The Audio Line input signal is a mono signal.
Right: The Audio Line input signal is the right channel of a stereo signal.
Audio Input Line [1..4] Level
Define the level of the audio source on the line input connector.
See the Audio Level table in the Physical Interface Guide for the codec for a complete
overview of the values represented in dB.
Requires user role: ADMIN, INTEGRATOR
Default value: 10
Value space: Integer (0..24)
Select a value between 0 and 24, in steps of 1 dB.
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
84
Administrator Guide
System settings System settings Appendices