Output Design - Mantracourt T24-ACMi-SA User Manual

Output Design

This is where you define the actual printed output based on free text and tokens.
Tokens are special codes contained within angled brackets <token> which have special meanings and are
converted to actual values once an output is triggered.
See list of tokens at the bottom of this section.
End Of Line Token
Design Area
Available Tokens
Mantracourt Electronics Limited
This is not alterable. When you press the Enter key on the keyboard we need to
know which token to include in the design area. This is fixed to match the End Of
Line Character required by the printer hardware.
This is where you create your output using a mixture of free text and tokens.
See the example in the screenshot above.
To enter a token you can type it in or double click the token list on the right of
the page (a single click will display the description of the token).
By default the printer will print each line readable from the
front of the printer. As each line is decoded from your
designed lines the effect is that the lines appear on the
printout in reverse order. You can compensate for this either
by designing your lines in reverse order or including the
following tokens at the top of your lines <1B><63><00>
288
T24 Telemetry User Manual