Solar Panel Orientation - Mantracourt T24-ACMi-SA User Manual

The PP1 110 Vac – 240 Vac input has a sealing cap for when it is not connected to the mains. The sealing cap is
removed by pushing the outer sleeve towards the case and pulling the cap out.
To insert the mains cable input simply align the two parts using the locating grooves on the connector and push
in until the outer sleeve locks; to remove again repeat the same procedure as to remove the sealing cap.

Solar Panel Orientation

The SP1 is supplied on a mounting plate which when assembled with the horizontal support holds the panel at 50
degrees. The bracket is designed to be mounted on a pole or directly onto a wall.
For detailed panel angle information based on country and location see Solar Electricity Handbook calculator
here:
http://www.solarelectricityhandbook.com/solar-angle-calculator.aspx
393
Mantracourt Electronics Limited T24 Telemetry User Manual