Configuration; Input Settings - Mantracourt T24-ACMi-SA User Manual

Configuration

The T24 Toolkit provides a means of simple configuration of the module along with useful tools to aid
integration.
Launch the T24 Toolkit software application and pair to this module to enable the connection to the Toolkit to
allow configuration to take place.

Input Settings

Here you can set the Data Tags of the data used as the inputs.
The description in green below the 'Relay1' and 'Relay2' captions indicate the way in which the values from the
Data Tags will be used to compare against the setpoint to determine whether the relay will activate.
See the Relay Operation Settings section for details.
Items you can change:
Relay1DataTag[1-8]
Relay2DataTag[1-8]
Zero Offset [1-2]
Mantracourt Electronics Limited
See Common Toolkit Pages - Home
Enter up to eight Data Tags the data from which will be used to determine the
value compared to the set point to control relay 1.
Enter up to eight Data Tags the data from which will be used to determine the
value compared to the set point to control relay 2.
This value will be subtracted from the total of the summed data from the data
tags for Relay 1 and relay 2.
232
T24 Telemetry User Manual