T24-HLT
Overview
The T24-HLT has been designed specifically to operate with the
to provide a complete running line tensiometer solution. The Handheld can cycle round the three measurement
values of Load, Payout and Speed with the ability to tare the load and zero the payout values. Each measurement
type has its own scaling, display resolution and ability to change the display name.
A backlight is provided for low light operating conditions and a buzzer to warn of conditions such as overload
and wireless communications failure.
Order Codes
T24-HLT
Running line tensiometer Handheld Display which is used to indicate load, payout and speed
measurements from the running line tensiometer OEM module known as T24-LT1
Connections
Power
The handheld module is powered by two alkaline AA batteries.
For battery information please refer to
Due to the higher voltage requirements of this module NiMh and NiCad batteries are not
recommended.
Mantracourt Electronics Limited
Appendix D – Battery Selection
355
T24-LT1
therefore enabling an OEM manufacturer
T24 Telemetry User Manual