T24-Acmi-Sa; Power; Sensor - Mantracourt T24-ACMi-SA User Manual

T24-ACMi-SA

Power

The enclosure is designed to accept two AA batteries. Maximum voltage 1.8 V per cell.
For battery information please refer to

Sensor

The input connections are accessed by lifting the right hand cover plate, this plate incorporates the T24-ACMi
Antenna; take extra care when re-assembling that the grey UHF cable is attached to the antenna socket.
Screw Terminal Function
1 Shield
2 - Excitation
3 -Signal
4 +Signal
5 + 5 V Excitation
Mantracourt Electronics Limited
Appendix D – Battery Selection
41
T24 Telemetry User Manual