T24-Acmi-Saf; Power; Sensor - Mantracourt T24-ACMi-SA User Manual

T24-ACMi-SAf

Power

The enclosure is designed to accept two AA batteries. Maximum voltage 1.8V per cell.
For battery information please refer to

Sensor

The input connections are accessed by lifting the right hand cover plate, this plate incorporates the T24-ACMi
Antenna; take extra care when re-assembling that the grey UHF cable is attached to the antenna socket.
Screw Terminal Function
1 Shield
2 - Excitation
3 -Signal
4 +Signal
5 + 5 V Excitation
Mantracourt Electronics Limited
Appendix D – Battery Selection
58
T24 Telemetry User Manual