Operation
Up to 12 individual modules can be connected to and the user can step through each one in sequence.
If DoSleepWake is set then the handheld will wake transmitters when turned on and send them all to sleep again
when turned off. When the handheld wakes modules this is achieved through the transmission of a broadcast
wake. i.e. all modules on the same channel and with the same group key will wake.
Keys
Tare Key - This will toggle between gross and zeroed net mode. i.e. If the display shows gross
T
then pressing the key will zero the display. Pressing the key when in net mode will return the
display to gross mode. The Gross and Net modes are indicated as described below. Gross and
Net are retained through power off.
Next Key - Step to the next reading (Load, Payout and speed). A brief prompt will be
displayed before the value is shown.
i.e. 'Load', 'Payout' etc. Also see
Power Key - Press and hold the power key until the display shows BUSY then release the key.
Mantracourt Electronics Limited
Prompts
356
T24 Telemetry User Manual