Printer Operation And Maintenance; Paper Roll Fitting And Replacement; Buttons And Indicators - Mantracourt T24-ACMi-SA User Manual

Printer Operation and Maintenance

Paper Roll Fitting and Replacement

To open the printer door press the button marked
with the arrow in fully.
Now the door can be fully opened.
Note how the paper roll is fitted inside the printer. If
the roll is fitted upside down the printer will not print
correctly.

Buttons and Indicators

There are two LED indicators that also function as buttons. These are marked SEL (Select) and LF (Linefeed).
The red LED marked LF indicates when the printer has power applied.
The green LED marked SEL indicates when the printer is online.
For the printer to be able to print the printer must be online.
To manually feed the paper the printer must be taken offline. Press the LED/Button marked SEL and the green
LED will go out. Now you can press the LED/Button marked LF to feed the paper one line at a time.
Remember to press the SEL button again to put the printer back online to enable it to print again.
Mantracourt Electronics Limited
The door should open slightly. (This may need
help opening with a finger nail.)
Once the roll is fitted, close the door ensuring
that the paper exits through the small gap at the top of
the door and is not skewed.
295
T24 Telemetry User Manual