Display Format - Mantracourt T24-ACMi-SA User Manual

Display Format

Here you can adjust the display.
Items you can change:
Format & Resolution
Leading Zero Suppression
Overload Limit
Advanced
Mantracourt Electronics Limited
Here you can define how the values are displayed on the LCD. There are 7 digits
available and you can define where the decimal point is shown by entering
numerals where a zero indicates a numeric digit position.
When the data is being displayed the number of decimal places you define may
be overridden as the display will always show the correct number of integer digits.
Example: If you set the format to 000.0000 and the value to display is 1000.1234
the display will show 1000.123
You can also define the resolution, which is the block size of changes to the
display.
Example: If you enter the format as 000.0005 the display will only change in steps
of 0.0005 which can be used to mask noisy digits at high resolutions.
This can be turned on or off and will suppress leading zeroes when on.
Example: If the display reads 000.123 with leading zero suppression turned off it
will display 0.123 when leading zero suppression is turned on.
You can enter a limit here above which Overload will be shown on the display
instead of the actual value.
Enter zero to disable this feature.
This opens the advanced page where you can scale the displayed data.
198
T24 Telemetry User Manual