ACMi Type
Dimensions
This enclosure is 80 mm X 62 mm and 31 mm deep. The gland extends a further 25 mm from one long side.
Opening the Case
The case lid is secured with 4 x #2 cross head screws, remove the four screws and lift lid.
Mounting Information
The enclosure has two mounting holes as shown below; these mounting holes are external to the seal but still
covered by the case lid to offer fixings for some environmental protection. In addition mountings can be made
through the back of the case however a seal or gasket must be used to maintain environmental protection.
Mantracourt Electronics Limited
401
T24 Telemetry User Manual